Hello,

Two days ago my cable modem/internet connection stopped working, it worked for months before This is the setup. Cable from the wall goes to a splitter, which splits it to one cable to the cable modem and one cable to the TV. If I connect the cable modem directly to the wall, it works. If I connect the cable modem to splitter, it doesn't work, but the TV does (which is also connected to splitter). I tried another splitter, and get the same reaction - TV works, modem doesn't. My only theory is that the signal isn't strong enough for some reason (some amplifier broken on the way to my place or the freezing cold lately outside?) for the cable internet/modem connection to work through a splitter. If i use the splitter and don't connect a TV to it, it still doesn't work. What do you guys think? I rather fix it on my own than wait weeks for the cable guy to come and probably pay some godly service fee.

Please help

I didn't find the right solution from the internet.

References:
https://arstechnica.com/civis/viewtopic.php?t=584432
Motion graphics animation company

Thank you

Hello,

I carefully followed the instructions and connected a 2wire modem/router to Ooma Modem port and Ooma Home to my PC1. Everything worked except I had problems accessing my 2wire setup pages from my PC1. I have another PC (PC2) connected to another port on the 2wire and a laptop that connects via the WiFi. PC2 and the laptop had no connectivity issues. So I decided I did not need to access the Ooma setup and moved my PC1 connection directly to the 2wire. After I did this I found that I had some internet connection problems where my internet connection to PC1 was intermittant. A download would download for about 5 seconds and stop for about a minute over and over. When I unplugged the Ooma power the download would continue uninterrupted. So I reconnected PC1 to the Ooma home port and I still have internet connection problems and I still have problems with the 2wire pages not coming up. When I first connected the Ooma I could see the Ooma listed on my 2wire Home Network with some note about DMZ. Now I see one connection listed as just an IP address with no DMZ note and there is no connection for my PC1. I don't really understand networks and I've been reading lots of posts here. But I don't understand why it looks like my Ooma and PC1 are fighting over the same IP address. That would also explain my internet connectivity issues with PC1. I have no idea how to fix this or why this has happened. I have rebooted all devices many times in the order stated in the manual. The internet connectivity issues occur with no Ooma calls. Any help will be greatly appreciated.

Please help

I didn't find the right solution from the internet.

References:
https://www.ooma.com/forums/viewtopic.p … amp;t=9189
Explainer video services

Thank you

Hello,

I'm learning how to paint plaques for a friend who builds stained glass windows. I'm using the Reusche paints (tracing black, enamels, etc). Things have gone pretty well, but I have a question I'm hoping someone can answer... When I fire the plaques, some of the painting on them has a matte appearance and some has a semi-gloss appearance. The only possible factor that I have found that may be causing the difference is which shelf they are placed on when firing. I didn't pay attention in the first several firings as to the position, but in the last few, it seems the ones on the top shelf have the semi-gloss finish (which is what I want) and the ones on the lower shelves have the matte finish.  Any ideas or suggestions? I have the space to fire at least 6 plaques at a time - but don't want to end up with 2 glossy and 4 matte..

Please help

I didn't find the right solution from the internet.

References:
http://warmglass.com/phpBB3/viewtopic.php?t=2802
Creative production company

Thank you

Hello,

had never painted on glass before but wanted to paint japanese letters onto a fused piece. I got some FuseMaster Opal paints from a local stained glass store. They said they used vinegar as a medium for the paint. I mixed some canary yellow and painted 1 symbol onto BE adventurine green and a made some violet by mixing red and blue (with the vinegar) and painted another symbol onto BE opal. white. I did a full fuse at 300dph to 1250 with a 20 minute hold, then 200dph to 1475 with a 25 minute hold, flash vent to 960 then 200dph to 800 then 9999 to room temp. When I took the pieces out most of the canary yellow paint had disappeared (it was very wet when I painted it on) and the violet I had mixed and painted on white had turned to just blue.Can anyone point me in the right direction? Is vinegar truely a medium to use? Did I fire to hot? They had told me that this paint was to fire from 1350-1550F. The first attempt certainly did not go well but looking for what to change on next attempt. Are these even the right paints?

Please help

I didn't find the right solution from the internet.

References:
http://warmglass.com/phpBB3/viewtopic.p … amp;t=2917
Video production quote

Thank you

Hi,

Take the word butterfly. To use this word it is not necessary to make the voice weigh less than an ounce or equip it with small dusty wings. It is not necessary to invent a sunny day or a field of daffodils. It is not necessary to be in love, or to be in love with butterflies. The word butterfly is not a real butterfly. There is the word and there is the butterfly. If you confuse these two items people have the right to laugh at you. Do not make so much of the word. Are you trying to suggest that you love butterflies more perfectly than anyone else, or really understand their nature? The word butterfly is merely data. It is not an opportunity for you to hover, soar, befriend flowers, symbolize beauty and frailty, or in any way impersonate a butterfly. Do not act out words. Never act out words. Never try to leave the floor when you talk about flying. Never close your eyes and jerk your head to one side when you talk about death. Do not fix your burning eyes on me when you speak about love. If you want to impress me when you speak about love put your hand in your pocket or under your dress and play with yourself. If ambition and the hunger for applause have driven you to speak about love you should learn how to do it without disgracing yourself or the material.

Please help.

I didn't find the right solution from the Internet.

References:-
https://www.leonardcohenforum.com/viewtopic.php?t=20935
Motion graphics agency

Thanks!

Форум=Веер Океана=Конференции прохожих соискателей

Затрагиваемые темы на форуме:
Клуб знакомств, Реклама, Новости первой величины, О магазинах и новинках, Инвестиции,  Игры, О сервисах раскрутки, Форекс, Электронные платёжные системы,
Знаки Зодиака (О созвездиях), Цветы (Цветоводство), Энциклопедия растений,

Конфигуратор в сети интернета!

Красивый и разнообразный!

Оживлённый форум на разнообразные темы

Ссылка на страницу регистрации: Войти на форум

Форум=Веер Океана=Конференции прохожих соискателей

Затрагиваемые темы на форуме:
Клуб знакомств, Реклама, Новости первой величины, О магазинах и новинках, Инвестиции,  Игры, О сервисах раскрутки, Форекс, Электронные платёжные системы,
Знаки Зодиака (О созвездиях), Цветы (Цветоводство), Энциклопедия растений,

Конфигуратор в сети интернета!

Форум с уклоном на криптовалюты- площадки помощники для продвижения

Красивый и разнообразный!

Оживлённый форум на разнообразные темы

Ссылка на страницу регистрации: Войти на форум